Filter
Top Products
M2016S Secure Set Page 117 of 504
Telephones and Consoles Description, Installation, and Operation
3 Follow the steps in Table 15 to perform the necessary steps and check
results.
Table 15
M2016S telephone self-test steps and results (Part 1 of 2)
Step Action Result
1 Begin test (plug in line cord while
holding down the RLS key).
The handset is on hook.
Speaker beeps once, all LCDs flash.
Message Waiting lamps light steadily.
Display reads:LOCAL DIAGNOSTIC MODE
PRESS RLS KEY TO EXIT
2 Press each Function key, from zero
to fifteen (if there are Key Expansion
Modules, continue pressing the
Function keys, in any order).
Adjacent LCD goes off when a key is
pressed.
3 Press the Hold key. Speaker beeps.
4 Press each dial pad key. Speaker beeps each time a key is pressed.
5a Lift the handset (if applicable). Speaker beeps.
Press the dial pad keys. Handset beeps.
Replace the handset.