Filter
Top Products
M3900 installation and configuration Page 199 of 504
Telephones and Consoles Description, Installation, and Operation
3 Plug the cable from the KBA into the 10-pin connection port on the
telephone. See Figure 38.
Figure 38
KBA Installation
4 Thread the cable through the opening in the side of the telephone.
5 Insert the clips on the telephone into the hinges on the footstand; then
press on the front of the footstand until it snaps into place.
6 Install the Single KBA Footstand Assembly. See Figure 39.
Tilt Handles
ACM
connection
port
Clips
Plug cable into10-pin
connection port
553-9538