Filter
Top Products
Page 106 of 504 M2016S Secure Set
553-3001-367 Standard 3.00 August 2005
Physical description
The M2016S is equipped with:
• LCD indicators
• Volume control
• Message Waiting lamp
• Hold key
• Release key
• Speaker
LCD indicators
The M2016S has a number of programmable keys with LCD indicators that
can be assigned to any combination of directory numbers and features. The
lower right-hand key (key 0) is reserved for the Primary DN.
When equipped with a Display module, key 07 is automatically assigned as
the Program key and cannot be changed.
LCD indicators support 4 key/LCD states:
Note: An indicator fast flashes when a feature key is pressed but the
procedure necessary to activate the feature has not been completed.
Volume control
One key with two toggle positions controls volume. Pressing the right
“volume up” or left “volume down” side of the key incrementally increases
or decreases the volume for the tone or sound which is currently active.
The volume settings are retained for subsequent calls until new volume
Function LCD state
idle off
active on (steady)
ringing flash (60 Hz)
hold fast flash (120 Hz)