Filter
Top Products
Startup Procedures
To activate CMS, follow these steps:
1 Turn on your PC.
If you use an AUTOEXEC.BAT file to automatically start the CMS
program, the CMS Menu appears.
Go to step 4. (For informatiom on
creating an AUTOEXEC.BAT file, refer to “Starting up the CMS Program
Automatically” in Section 3.)
2 When the C> prompt appears, type cd cms and press
[ ↵ ↵ ] .
3 When C> prompt appears again, type cms and press
[ ↵ ↵ ] .This starts
the CMS program. The CMS Main Menu, below, appears.
Bon Voyage Travel
CMS CMSIIR2 2:03p 06/27
CALL MANAGEMENT SYSTEM (CMS)
FOR THE MERLIN(r) II CS
(c)1986, 1987, 1988, by AT&T
MAIN MENU
F1 - Start Call Management
F4 - Administer CMS
(Agents, Lines, Configurations)
F5
- Print Reports
F8 -
Exit to DOS
F Start F Admin F Print
1 Call Mgt
4
CMS
5 Reports
F10 - Help
F Exit
8 to Dos
4 Press [ F1 ] (labeled “Start Call Mgt” ) to begin call management. If you
have not preselected a shift configuration, the Initialization screen (below)
appears with a list of configurations and a prompt.
5-8 Startup Procedures