Filter
Top Products
Getting Started
START
CMS
These procedures describe turning on the PC and selecting an administration
activity from the Administration Menu.
You may want to review “Key Facts
and Considerations” at the end of Section 2 before
administering
CMS.
ADMINISTERING
To start administering CMS follow these steps:
1 Turn on your PC.
If you use an AUTOEXEC.BAT file to automatically start the CMS
program, the CMS Menu appears. Go to step 4. (For information on
creating an AUTOEXEC.BAT file, refer to “Starting the CMS Program
Automatically” in Section 3.)
If the A> prompt appears instead of the C> prompt, type c: and press
[ ↵ ] to change to disk drive C.
2 When the
C> prompt appears, type
cd cms
and press [ ↵ ] .
3 When C> reappears, type
cms
and press [ ↵ ] ,
This starts the CMS program.
The CMS Main Menu, shown below, appears.
Bon Voyage Travel
CMS CMSIIR2 2:03p 06/27
CALL MANAGEMENT SYSTEM (CMS)
FOR THE MERLING(r) II CS
(c) 1986, 1987, 1988 by AT&T
MAIN MENU
F1 -
F4 -
F5 -
F8 -
F Start
F Admin
F Print
1
CALL MGT
4
CMS
5 Reports
Start Call Management
Administer CMS
(Agents, Lines, Configurations>
Print Reports
Exit to DOS
F10 - Help
F
Exit
8 to DOS
Getting Started 4-3