Polycom 9000-Series Telephone User Manual


 
Fax Machines
4-19
If you are using the PARTNER MAIL system’s Automated Attendant Service, you
can program PARTNER MAIL to transfer fax calls to the fax extension or a group
of fax extensions automatically. Use Fax Machine Extensions (#601) to identify
fax extensions. If you have multiple fax machines, put all of the fax extensions into
a single Hunt Group (any group 1–6) using Hunt Group Extensions (#505).
Restricting Dialing from a Fax Machine
You can use dialing restrictions to restrict calling activity on a fax machine. For
example, you can use Outgoing Call Restriction (#401) to restrict the fax
machine to local calls only. For a more detailed discussion of dialing restrictions,
see Chapter 2.
Single Fax Machine
The single fax machine setup (shown in Figure 4-8) is good for moderate traffic.
The fax machine has its own line (line A), the number of which is published as the
fax number. (The fax line can be used by other phones when all other lines are
busy.) The fax machine is connected to its own extension (extension X).
To Use
The fax machine automatically answers all calls that come in on the fax line. If
a call comes in on another line, you can transfer the call to the fax extension
(see ‘‘Transferring a Call to the Fax Machine’’ on page 4-17). If you have
programmed a Fax Management button, you can transfer a call to the fax
machine with a single touch, as well as monitor the status of the fax machine
(see ‘‘Using the Fax Management Feature’’ on page 4-16).
When you send a fax, the system automatically selects the fax line.
Figure 4-8. Single Fax Machine
Fax
Line A
Ext
X
CONTROL
UNIT
FAX