Filter
Top Products
SMDR Top of Page (#609)
5-249
SMDR Top of Page (#609)
Description
Call Reporting (often referred to as
Station Message Detail Recording
or
SMDR)
provides detailed tracking of telephone usage in a printed report. This System
Programming procedure notifies the system that the printer has been aligned to
the top of a new page. Use this feature after inserting paper, clearing a jam, or to
print a new header after changing SMDR Output Format or SMDR Talk Time.
When this feature is used, the system prints a new call report header.
Related Features
■ You can use SMDR Record Type (#608) to specify the type of calls to be
included on call reports.
■ You can use SMDR Output Format (#610) to identify whether a maximum
of 15 or 24 digits is printed for dialed numbers on the call report.
■ You can set SMDR Talk Time (#611) to active to print on call reports the
time a user spends on an incoming outside call—from the time the user
answers the call to the time the call is disconnected from the system.
■ You can use Display Language (#303) to specify the language in which
the call report page header should print.
Considerations
■ This feature requires special hardware and/or software. For more
information, see ‘‘Call Reporting Devices (SMDR)’’ on page 4-9.
■ This procedure is skipped in the sequence of programming procedures
when cycling. To use this procedure, enter the code directly.
Using
1. Make sure the paper in the printer is aligned at the top of a new page.
2. Press
f 0 0 s s # 6 0 9.
The system responds by printing the call report page header
.
3. Select another procedure or exit programming mode.