Filter
Top Products
Feature Reference
5-60
Related Features
■ Dialable features that will interrupt Call Screening are: Last Number
Redial (F05), Station Lock (F21), Personal Speed Dial Numbers
(F80-89), and System Speed Dial Numbers (F600-699).
■ Programmed buttons that will interrupt Call Screening are: Do Not Disturb
(F01), Save Number Redial (F04), Last Number Redial (F05), and
Station Lock (F21).
■ If the voice messaging system extension does not have Automatic
Extension Privacy (#304) turned on, other users can bridge onto the call.
If a user bridges onto the call, a forward disconnect signal is sent to the
voice messaging system and it disconnects from the call. This causes the
screening station to be dropped from the call, and the person who bridged
onto the call is now talking to the calling party.
C
onsiderations
■ Call Screening must be programmed on a button with lights. For security
purposes, this is only permitted using Centralized Extension Programming.
■ This feature is not available at tip and ring, proprietary cordless, or wireless
telephones.
■ This feature can be primed only by pressing the programmed button. It
cannot be accessed by dialing the Call Screening feature access code.
■ An incoming call can be screened at that station only if the station is the
Line Coverage Extension for that line, the call has been transferred to that
station, or the call is an intercom call to the station.
■
If the user is currently on a line or intercom call, Call Screening will be ignored.
■ After a call has been sent to the voice mail system, the Call Screening
feature cannot be used to screen that call. This feature must be primed
before or while the call is ringing at the telephone.
■ Users cannot create a conference call while screening a call.
■ While a call is being screened, dial pad button pushes are ignored.
■ A user cannot enter program mode while screening a call.
Programming
1. Press f 0 0 s s c at
extension 10 or 11.
2. Enter the number of the extension to be programmed with the feature.
3. Press a programmable button with LEDs.
4. Press
f 2 5....
5. Program another extension or exit programming mode.