Feature Reference
5-260
System Day (#102) Release 2.0 and
Earlier
Description
System Day is not applicable to Release 3.0 or later. In those releases, the
system calculates the day of the week for you, using System Date (#101).
This System Programming procedure sets the day of the week that appears on
system display phones.
Related Features
■ Backup Programming—Automatic (#123) and Backup Programming—
Manual (#124) do not backup up the System Day.
■ Restore Programming (#125) does not restore the System Day.
Considerations
Be sure that the System Day is set correctly before using backup or restore
procedures.
Valid Entries
1 = Sunday ✔
2 = Monday
3 = Tuesday
4 = Wednesday
5 = Thursday
6 = Friday
7 = Saturday
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To change the System Day:
1. Press
f 0 0 s s # 1 0 2 at extension
10 or 11.
2. Change the day by entering a new setting number as listed in “Valid
Entries” above. For example, to set the day to Tuesday, press
D
until the display reads:
System Day
3 Tuesday
3. Select another procedure or exit programming mode.