Filter
Top Products
Feature Reference
5-286
VMS Hunt Schedule (#507)
Description
This feature applies only if you have a voice messaging system.
This System Programming procedure determines whether the outside lines
assigned to Hunt Group 7 hunt through the VMS Hunt Group all the time, only
during Day operation (Night Service is off), or only during Night operation (Night
Service is on). This feature affects only the Automated Attendant Service of the
voice messaging system. For ACS Release 3.0, VMS Hunt Schedule is
programmable on a per line basis.
Related Features
■ You must use Group Call Distribution (#206) to assign lines to Hunt
Group 7.
■ You must use Hunt Group Extensions (#505) to assign the extensions
associated with the voice messaging system hardware to Hunt Group 7.
■ If you set the VMS Hunt Schedule for Day Only or Night Only, you must use
Night Service Button (#503) to program a Night Service button for
extension 10.
■ When the VMS Hunt Schedule is set to Day Only and Night service is
turned off (in Day mode), calls coming in on lines assigned to the hunt
group will be sent to the hunt group. If Night Service is turned on (in Night
mode), incoming calls will not go to the Hunt Group.
■ When the VMS Hunt Schedule is set to Night Only and Night service is
turned off (in Day mode), calls coming in on lines assigned to the hunt
group will not be sent to the hunt group. If Night Service is turned on (in
Night mode), incoming calls will go to the Hunt Group.
Valid Entries
1 = Always ✔
2 = Day Only
3 = Night Only