Polycom 9000-Series Telephone User Manual


 
Feature Reference
5-12
Valid Entries
Up to 12 digits including 0–9, #, *, and h (any single digit)
Examples
The examples below show how you would enter telephone numbers for an
Allowed Phone Number List in Step 4 of “Programming.” When an Allowed List is
assigned to an extension, users can dial numbers on that list, even if the numbers
would otherwise be restricted.
Specific Telephone Numbers. Enter the phone number exactly as you
would dial it. For example, to allow calls to the number 201 555-1111, make
the following entries:
Toll Call Prefix required
12015551111
Toll Call Prefix not required
2015551111
All Telephone Numbers in One Area Code. The following list entries
allow calls to the 800 area code:
Toll Call Prefix required
1800
Toll Call Prefix not required
800
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To create a list of Allowed Phone Numbers:
1. Press
f 0 0 s s # 4 0 7 at extension
10 or 11.
2. At the
List Number:
prompt, enter a list number (1–8). For example, to
select the first list, press
1.
3. At the
Entry:
prompt, select a list entry (01–10). For example, to select
the first entry, press
0 1.
4. At the
Data
- - - - - - - - - - - - prompt, enter the first telephone number.
5. To save the telephone number in memory, you must press
e.