Polycom 9000-Series Telephone User Manual


 
B-1
Maintenance, Repair,
and Ordering Information
Maintenance
Your system is designed to provide trouble-free performance without any special
maintenance procedures. To reduce the risk of accidental damage:
Keep the system modules in an area free of dust, smoke, and moisture,
and do not block the air vents by placing objects on top of the control unit.
Do not place telephones near a heating duct, radiator, or other heat source,
and do not drop or expose them to excessive shock or vibration.
Unplug the telephone if its cord is damaged, if liquid is spilled into it, or if its
housing becomes cracked or otherwise damaged.
To clean your telephone, wipe the outside housing with a soft, dust-free
cloth. If absolutely necessary, you may use a cloth
slightly
dampened with
a mild soap and water solution. Dry quickly with a soft cloth.
!
CAUTION:
Your telephone contains sensitive electronic parts. Never submerge it in any
kind of liquid, and never use detergents, alcohols, solvents, abrasive
cleaners, or an excessive amount of water when cleaning the housing and
faceplate. To do so could result in irreparable damage.
Repair Information
Outside the continental U.S., contact your Lucent Technologies Representative or
local Authorized Dealer for warranty and repair information applicable to your
system.
In-Warranty Repairs
If you purchased or leased your system directly from Lucent Technologies, Lucent
Technologies will repair it free of charge during the one-year warranty period.
Simply call the hotline and ask for service.