Filter
Top Products
Caller ID
5-65
■ The lines associated with Caller ID must be connected to a line jack on a
PARTNER ACS processor module, 206EC module, 308EC module, or
400EC module. For more information, refer to the
PARTNER Advanced
Communications System Installation
guide.
■ Caller ID information is passed to an extension between the first and
second ring. To receive Caller ID information, wait until the second ring
before answering the call.
■ Individuals with Call Waiting from the local telephone company will not
receive Caller ID information for the second call.
■ Not all calls on Caller ID lines are displayed. This varies by local phone
company. When Caller ID information is not captured, the system date and
day (default) displays instead.
■ The incoming telephone number replaces the system date and time display
on system phones for the duration of the call. An out-of-area message (- - -
- - - - - - - - -) displays if a call is being dialed from a region that does not
support Caller ID. A privacy message (
Priv.
) displays if the caller has
blocked transmission of Caller ID information.
■ If you use SMDR, telephone numbers of incoming calls print on call reports
after the call is completed. (Private and out-of-area numbers are reported
as “IN” on call reports.)