Polycom 9000-Series Telephone User Manual


 
System Programming Quick Reference
Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11
TO START SYSTEM
TO END SYSTEM PROGRAMMING:
TO CYCLE THROUGH SYSTEM
PROGRAMMING:
TO CYCLE THROUGH
PRESS Feature   0   0
PROGRAMMING PROCEDURES:
AVAILABLE SETTINGS:
PRESS
Feature
 
0
 
0
TO USE A SPECIFIC PROCEDURE:
PRESS
Next Procedure
or
Prev Procedure
PRESS
Next Data
or
Prev Data
PRESS System Program
DIAL
#
and three-digit procedure code
NOTE: Procedures #399, #609,
TO RETURN TO FACTORY
PRESS System Program
Example:
#
 
1
 
0
 
1
for System Date
and #728—shown below in dashed
SETTING:
boxes-are skipped when cycling.
PRESS
Remove
Dialing Restrictions and Permissions
OUTGOING CALL RESTRICTION
DIAL
#401
(p. 5-204)
DIAL
a system extension number
DIAL
1 = No Restriction
2 = Inside (intercom) Only
3 = Local (intercom and
local) Only
PRESS
Next Item
to program another
extension
TOLL CALL PREFIX
(p. 5-269)
DIAL #402
DIAL
1 = 0/1 plus Area Code
and Number
2 = Area Code and
Number Only
SYSTEM PASSWORD
(p. 5-261)
DIAL
#403
DIAL four digits to set the password
DISALLOWED PHONE NUMBER
LISTS
(p. 5-114)
DIAL
#404
DIAL a list number (1–8)
DIAL a list entry (01–10)
To add entry:
DIAL the telephone number
(up to 12 digits)
PRESS
Enter
PRESS
Remove
to remove a list entry
PRESS
Next Item
to program another
list entry
To program another list:
PRESS
Next Procedure
 
Prev Procedure
enter a new list number and
repeat above steps.
DIAL
#405
DISALLOWED LIST ASSIGNMENTS
(p. 5-113)
DIAL
a system extension number
DIAL a list number (1–8)
DIAL
1 = Assigned
2 = Not Assigned
PRESS
Next Item
to assign another list
To program another extension:
PRESS
Next Procedure
 
Prev Procedure
,
enter a new extension number
and repeat above steps.
EMERGENCY PHONE NUMBER
LISTS
(p. 5-126)
DIAL
#406
DIAL
a fist entry (01–10)
To add entry:
DIAL the telephone number (up to
12 digits)
PRESS
Enter
PRESS
Remove
to remove a list entry
PRESS
Next Item
to program another
list entry
ALLOWED PHONE NUMBER
(p. 5-11)
DIAL
#407
DIAL
a fist number (1–6)
DIAL
a list entry (01–10)
To add entry:
DIAL the telephone number (up
to 12 digits)
PRESS
Enter
PRESS
Remove
to remove a list entry
PRESS
Next Item
to program another
list entry
To program another list:
PRESS
Next Procedure
 
Prev Procedure
,
enter a new list number and
repeat above steps.
ALLOWED LIST ASSIGNMENTS
DIAL #408
(p. 5-10)
DIAL
a system extension number
DIAL
a list number (1–6)
DIAL
1 = Assigned
2 = Not Assigned
PRESS
Next Item
to assign another list
To program another extension:
PRESS
Next Procedure
 
Prev Procedure
,
enter a new extension number
and repeat above steps.
FORCED ACCOUNT CODE LIST
DIAL
#409
(p. 5-140)
DIAL
a list entry (01–99)
To add entry:
DIAL the account code (up to
6 digits)
PRESS
Enter
PRESS
Remove
to remove a list entry
PRESS
Next Item
to program another
list entry
STAR CODE DIAL DELAY
DIAL
#410
(p. 5-252)
DIAL
0 = 0 Seconds Delay
1 = 1 Second Delay
2 = 2 Seconds Delay
3 = 3 Seconds Delay
4 = 4 Seconds Delay
5 = 5 Seconds Delay
6 = Not Active
System Speed Dial Number (p. 5-265)
To program a number:
PRESS
Feature
 
0
 
0
to enter programming mode
PRESS Feature<
DIAL
a three-digit code (600–699)
DIAL
the telephone number—up to 28 digits
including special characters (see page
5-250). To "mark" it (to overide restrictions),
dial
before the telephone number.
To program another number, or to change a
number, repeat
PRESS
Feature
 
0
 
0
to exit programming mode
To remove a number:
PRESS
Feature
 
0
 
0
to enter
programming mode
PRESS
Feature<
DIAL
the System Speed Dial number's
code (600—699)
PRESS Mic/HFAI
To remove another number, repeat
PRESS
Feature   0   0to exit
programming mode