Filter
Top Products
Emergency Phone Number List (#406)
5-127
■ Overriding Number on a Disallowed List. You can use Emergency List
entries to override numbers that would otherwise be disallowed. For
example, if you created Disallowed List entries to prevent calls to area code
201, but you want to allow calls to a specific number in that area code
(such as the number of a manager who is on call after hours), put the
number in the Emergency List:
— Toll Call Prefix required
12015556666
and
02015556666
— Toll Call Prefix not required
2015556666
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To create an Emergency Phone Number List:
1. Press
f 0 0 s s # 4 0 6 at extension
10 or 11.
2. Select a list entry (01–10). For example, to select the third entry, press
0
3. A display similar to the following appears:
Emergency List 03
Data - - - - - - - - - - - -
3. Enter the telephone number.
4. To save the telephone number in memory, you must press
e.
5. At this point:
■ To enter other phone numbers, press n to select a different
list entry and repeat Steps 3 and 4.
■ To change the phone number you just entered, press r and
repeat Steps 3 and 4.
■ To delete the phone number you just entered, press r.
6. Select another procedure or exit programming mode.