Filter
Top Products
Voice Interrupt On Busy Talk-Back (F18)
5-291
Voice Interrupt On Busy Talk-Back (F18)
Description
This feature is available only on system phones.
This feature lets you program a button that is used to respond to a voice interrupt
on busy call while the user is active on another call.
Related Procedures
You must use Voice Interrupt On Busy (#312) to identify extensions that can
receive an intercom call while busy on another call.
Considerations
Voice Interrupt On Busy Talk-Back must be programmed on a button with lights.
This feature will not work if it is programmed on a button without lights.
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
1. Press
f 0 0 s s c at extension
10 or 11.
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button with lights.
4. Press
f 1 8.
5. Program another button for this extension or exit programming mode.
Using
To respond to a voice interrupt on busy call (you hear two beeps and the
originator’s voice—be aware that the third party to whom you are speaking
probably also will hear the two beeps and the faint sound of the originator’s voice):
1. Ask the party with whom you are speaking to hold, but
do not
put the call
on hold.
2. Press the Voice Interrupt On Busy Talk-Back button.
The green light next to the Voice Interrupt On Busy Talk-Back button turns
on. Voice Interrupt On Busy Talk-Back is activated.