Filter
Top Products
IPC-527
Cisco IOS IP Configuration Guide
Configuring Router-Port Group Management
Protocol
This chapter describes the Router-Port Group Management Protocol (RGMP). RGMP is a Cisco protocol
that restricts IP multicast traffic in switched networks. RGMP is a Layer 2 protocol that enables a router
to communicate to a switch (or a networking device that is functioning as a Layer 2 switch) the multicast
group for which the router would like to receive or forward traffic. RGMP restricts multicast traffic at
the ports of RGMP-enabled switches that lead to interfaces of RGMP-enabled routers.
For a complete description of the RGMP commands in this chapter, refer to the Cisco IOS IP Command
Reference, Volume 3 of 3: Multicast. To locate documentation of other commands that appear in this
chapter, use the command reference master index, or search online.
To identify the hardware platform or software image information associated with a feature, use the
Feature Navigator on Cisco.com to search for information about the feature or refer to the software
release notes for a specific release. For more information, see the “Identifying Supported Platforms”
section in the “Using Cisco IOS Software” chapter.
IP Multicast Routing Overview
The Cisco IOS software supports the following protocols to implement IP multicast routing:
• Internet Group Management Protocol (IGMP) is used between hosts on a LAN and the routers on
that LAN to track the multicast groups of which hosts are members.
• Protocol Independent Multicast (PIM) is used between routers so that they can track which multicast
packets to forward to each other and to their directly connected LANs.
• Distance Vector Multicast Routing Protocol (DVMRP) is the protocol used on the MBONE (the
multicast backbone of the Internet). The Cisco IOS software supports PIM-to-DVMRP interaction.
• Cisco Group Management Protocol (CGMP) is a protocol used on routers connected to Catalyst
switches to perform tasks similar to those performed by IGMP.
• RGMP is a protocol used on routers connected to Catalyst switches or networking devices
functioning as Layer 2 switches to restrict IP multicast traffic. Specifically, the protocol enables a
router to communicate to a switch the IP multicast group for which the router would like to receive
or forward traffic.