Filter
Top Products
Configuring Server Load Balancing
IOS SLB Configuration Task List
IPC-143
Cisco IOS IP Configuration Guide
Enabling the Real Server for Service
To place the real server into service, use the following command in SLB real server configuration mode:
Specifying a Virtual Server
To specify a virtual server, use the following command in global configuration mode:
Associating a Virtual Server with a Server Farm
To associate the virtual server with a server farm, use the following command in SLB virtual server
configuration mode:
Configuring Virtual Server Attributes
To configure virtual server attributes, use the following command in SLB virtual server configuration
mode:
Command Purpose
Router(config-slb-real)# inservice
Enables the real server for use by IOS SLB.
Command Purpose
Router(config)# ip slb vserver virtserver-name
Identifies a virtual server and enters SLB virtual
server configuration mode.
Command Purpose
Router(config-slb-vserver)# serverfarm serverfarm-name
Associates a real server farm with a virtual server.
Command Purpose
Router(config-slb-vserver)# virtual ip-address {tcp | udp}
port-number [service service-name]
Specifies the virtual server IP address, type of
connection, port number, and optional service
coupling.