Cisco Systems 78-11741-02 Wireless Office Headset User Manual


 
Configuring PGM Host and Router Assist
Monitoring and Maintaining PGM Host and Router Assist
IPC-499
Cisco IOS IP Configuration Guide
Enabling PGM Router Assist with a Virtual Host Interface
To enable PGM Router Assist on a vif, use the following command in interface configuration mode:
See the “PGM Router Assist with a Virtual Interface Example” section later in this chapter for an
example of enabling PGM Router Assist with a virtual interface.
Enabling PGM Router Assist with a Physical Interface
To enable PGM Router Assist on the router and to configure the router to forward PGM packets through
a physical interface, use the following commands in interface configuration mode:
See the “PGM Router Assist with a Physical Interface Example” section later in this chapter for an
example of enabling PGM Router Assist with a physical interface.
Monitoring and Maintaining PGM Host and Router Assist
This section provides information on monitoring and maintaining the PGM Host and Router Assist
feature.
Monitoring and Maintaining PGM Host
Note Support for the PGM Host feature has been removed. Use of this feature is not recommended.
To reset PGM Host connections, use the following command in privileged EXEC mode:
Command Purpose
Router(config-if)# ip pgm router
Enables the router to assist PGM on this interface.
Note You must configure a vif by using the interface vif number
global configuration command on the router before enabling
PGM Assist on the router; otherwise, PGM Assist will not
be enabled on the router.
Command Purpose
Router(config-if)# ip pgm router
Enables the router to assist PGM on this interface.
Command Purpose
Router# clear ip pgm host {defaults | traffic}
Resets PGM Host connections to their default values and clears
traffic statistics.