Cisco Systems 78-11741-02 Wireless Office Headset User Manual


 
Configuring Mobile IP
Mobile IP Configuration Examples
IPC-176
Cisco IOS IP Configuration Guide
Monitoring and Maintaining HA Redundancy
To monitor and maintain HA redundancy, use the following commands in EXEC mode, as needed:
Mobile IP Configuration Examples
This section provides the following Mobile IP configuration examples:
Home Agent Configuration Example
Home Agent Using AAA Server Example
Foreign Agent Configuration Example
Mobile IP HA Redundancy Configuration Examples
HA Redundancy for Physical Networks Example
HA Redundancy for a Virtual Network Using One Physical Network Example
HA Redundancy for a Virtual Network Using Multiple Physical Networks Example
HA Redundancy for Multiple Virtual Networks Using One Physical Network Example
HA Redundancy for Multiple Virtual Networks Using Multiple Physical Networks Example
Home Agent Configuration Example
In the following example, the home agent has five mobile hosts on interface Ethernet1 (network 11.0.0.0)
and ten on virtual network 10.0.0.0. There are two mobile node groups. Each mobile host has one
security association. The home agent has an access list to disable roaming capability by mobile host
11.0.0.5. The 11.0.0.0 group has a lifetime of 1 hour (3600 seconds). The 10.0.0.0 group cannot roam in
areas where the network is 13.0.0.0.
router mobile
!
! Define which hosts are permitted to roam
ip mobile home-agent broadcast roam-access 1
!
! Define a virtual network
ip mobile virtual-network 10.0.0.0 255.0.0.0
!
! Define which hosts are on the virtual network, and the care-of access list
ip mobile host 10.0.0.1 10.0.0.10 virtual-network 10.0.0.0 255.0.0.0 care-of-access 2
!
! Define which hosts are on Ethernet 1, with lifetime of one hour
ip mobile host 11.0.0.1 11.0.0.5 interface Ethernet1 lifetime 3600
Command Purpose
Router# debug ip mobile standby
Displays debug messages for Mobile IP
redundancy activities.
Router# show ip mobile globals
Displays the global home address if configured.
For each Mobile IP standby group, displays the
home agent address supported.
Router# show ip mobile binding [home-agent address | summary]
Displays mobility bindings with specific home
agent address.