Cisco Systems 78-11741-02 Wireless Office Headset User Manual


 
Configuring Router-Port Group Management Protocol
Monitoring and Maintaining RGMP
IPC-533
Cisco IOS IP Configuration Guide
Monitoring and Maintaining RGMP
To enable RGMP debugging, use the following command in privileged EXEC mode:
Figure 91 shows the debug messages that are logged by an RGMP-enabled router as the router sends
RGMP join <G> and RGMP leave <G> messages to an RGMP-enabled switch.
Figure 91 RGMP Debug Messages
Command Purpose
Router# debug ip rgmp [group-name | group-address]
Logs debug messages sent by an RGMP-enabled router.
Using the command without arguments logs RGMP Join <G>
and RGMP leave <G> messages for all multicast groups
configured on the router. Using the command with arguments
logs RGMP join <G> and RGMP leave <G> messages for the
specified group.
42760
PIM hello
PIM-SM
RGMP
RGMP
IGMP snooping
RGMP hello
RGMP: Sending a hello packet on Ethernet1/0
RGMP: Sending a leave packet on Ethernet1/0 for group 224.1.2.3
RGMP: Sending a bye packet on Ethernet1/0
All multicast packets
RGMP join 224.1.2.3
RGMP: Sending a join packet on Ethernet1/0 for group 224.1.2.3
Multicast packets for group 224.1.2.3
RGMP leave 224.1.2.3
Multicast packets for group 224.1.2.3
RGMP bye
All multicast packets
X
X