Filter
Top Products
About Cisco IOS Software Documentation
New and Changed Information
xxxiii
Cisco IOS IP Configuration Guide
New and Changed Information
The following is new or changed information since the last release of the Cisco IOS IP and IP routing
publications:
• The title of the Cisco IOS IP and IP Routing Configuration Guide has been changed to Cisco IOS
IP Configuration Guide.
• The Cisco IOS IP and IP Routing Command Reference has been divided into three separate
publications with the following titles:
–
Cisco IOS IP Command Reference, Volume 1 of 3: Addressing and Services
–
Cisco IOS IP Command Reference, Volume 2 of 3: Routing Protocols
–
Cisco IOS IP Command Reference, Volume 3 of 3: Multicast
• The following new chapters were added to the Cisco IOS IP Configuration Guide:
–
“Configuring Server Load Balancing”
–
“Configuring Source Specific Multicast”
–
“Configuring Bidirectional PIM”
–
“Configuring Router-Port Group Management Protocol”
• The following new chapter was added to the Cisco IOS IP Command Reference, Volume 1 of 3:
Addressing and Services:
–
“Server Load Balancing Commands”
Document Conventions
Within Cisco IOS software documentation, the term router is generally used to refer to a variety of Cisco
products (for example, routers, access servers, and switches). Routers, access servers, and other
networking devices that support Cisco IOS software are shown interchangeably within examples. These
products are used only for illustrative purposes; that is, an example that shows one product does not
necessarily indicate that other products are not supported.
The Cisco IOS documentation set uses the following conventions:
Convention Description
^ or Ctrl The ^ and Ctrl symbols represent the Control key. For example, the key combination ^D or Ctrl-D
means hold down the Control key while you press the D key. Keys are indicated in capital letters but
are not case sensitive.
string A string is a nonquoted set of characters shown in italics. For example, when setting an SNMP
community string to public, do not use quotation marks around the string or the string will include the
quotation marks.