Filter
Top Products
Configuring Multicast Source Discovery Protocol
MSDP Configuration Examples
IPC-492
Cisco IOS IP Configuration Guide
interface Loopback0
ip address 192.168.1.6 255.255.255.255
no shutdown
!
interface Ethernet2
description LANethernet 3
ip address 171.69.3.6 255.255.255.0
ip pim sparse-dense-mode
no shutdown
!
interface Ethernet5
description LANethernet 6
ip address 192.169.1.6 255.255.255.0
ip pim sparse-dense-mode
ip multicast boundary 20
no shutdown
!
router ospf 10
network 171.69.0.0 0.0.255.255 area 0
network 192.168.1.6 0.0.0.0 area 0
default-information originate metric-type 1
!
router bgp 1
no synchronization
network 171.69.0.0 nlri unicast multicast
network 192.168.1.6 mask 255.255.255.255 nlri unicast multicast
network 192.168.1.0
neighbor 192.168.1.2 remote-as 1 nlri unicast multicast
neighbor 192.168.1.2 update-source Loopback0
neighbor 192.168.1.2 next-hop-self
neighbor 192.168.1.2 route-map 2-intern out
neighbor 192.169.1.7 remote-as 2 nlri unicast multicast
neighbor 192.169.1.7 route-map 2-extern out
neighbor 192.169.1.7 default-originate
!
ip classless
ip msdp peer 192.168.1.2 connect-source Loopback0
ip msdp peer 192.169.1.7
ip msdp mesh-group outside-test 192.168.1.2
ip msdp cache-sa-state
ip msdp originator-id Loopback0
!
access-list 1 permit 192.168.1.0
access-list 1 deny 192.168.1.0 0.0.0.255
access-list 1 permit any
!
route-map 2-extern permit 10
match ip address 1
!
route-map 2-intern deny 10
match ip address 1
!