Filter
Top Products
Configuring IP Addressing
IP Addressing Examples
IPC-55
Cisco IOS IP Configuration Guide
map-list a
ip 10.1.0.1 atm-nsap 11.1111.11.111111.1111.1111.1111.1111.1111.1111.11
map-list b
ip 10.2.0.2 atm-nsap 22.2222.22.222222.2222.2222.2222.2222.2222.2222.22
Changing the Rate for Triggering SVCs Example
Figure 11 and the example configuration following it show how to configure a threshold of 100 kbps for
triggering SVCs and 50 kbps for tearing down SVCs.
Figure 11 Using NHRP and Triggering SVCs
Router A Configuration
ip cef
ip cef accounting non-recursive
!
interface Loopback0
ip address 140.206.58.130 255.255.255.255
no ip directed-broadcast
no ip mroute-cache
!
interface ATM0/1/0
no ip address
no ip directed-broadcast
no ip mroute-cache
atm pvc 5 0 5 qsaal
atm pvc 16 0 16 ilmi
!
interface ATM0/1/0.1 multipoint
ip address 140.206.58.55 255.255.255.192
no ip directed-broadcast
ip nhrp network-id 1
ip ospf network point-to-multipoint
atm pvc 102 0 40 aal5snap inarp 5
atm esi-address 525354555355.01
!
Router B
ATM SVC 102 0 40 ATM SVC 111 0 85
Loopback address
140.206.59.130
Loopback address
140.206.58.131
Loopback address
140.206.58.130
Router CRouter A
BGP
autonomous
system 7170
14462
BGP
autonomous
system 102
BGP
autonomous
system 103