Filter
Top Products
Configuring Mobile IP
Mobile IP HA Redundancy Configuration Task List
IPC-170
Cisco IOS IP Configuration Guide
Monitoring and Maintaining Mobile IP
To monitor and maintain Mobile IP, use any of the following EXEC commands:
Shutting Down Mobile IP
To shut down Mobile IP, use the following commands in global configuration mode:
Mobile IP HA Redundancy Configuration Task List
To configure your routers for Mobile IP HA redundancy, perform the required tasks described in the
following sections:
• Enabling Mobile IP (Required)
Command Purpose
Router# show ip mobile globals
Displays home agent and foreign agent global settings.
Router# show ip mobile host group
Displays mobile node groups.
Router# show ip mobile secure {host | visitor |
foreign-agent | home-agent | summary} address
Displays security associations.
Router# show ip mobile interface
Displays advertisements on interfaces.
Command Purpose
Router# show ip mobile host
Displays mobile node counters (home agent only).
Router# show ip mobile binding
Displays mobility bindings (home agent only).
Router# show ip mobile tunnel
Displays active tunnels.
Router# show ip mobile visitor
Displays visitor bindings (foreign agent only).
Router# show ip route mobile
Displays Mobile IP routes.
Router# show ip mobile traffic
Displays protocol statistics.
Router# clear ip mobile traffic
Clears counters.
Router# show ip mobile violation
Displays information about security violations.
Router# debug ip mobile advertise
Displays advertisement information.
1
1. Make sure IRDP is running on the interface.
Router# debug ip mobile host
Displays mobility events.
Command Purpose
Step 1
Router(config)# no ip mobile home-agent
Disables home agent services.
Step 2
Router(config)# no ip mobile foreign-agent
Disables foreign agent services.
Step 3
Router(config)# no router mobile
Disables Mobile IP process.