Filter
Top Products
Configuring IP Services
IP Services Configuration Examples
IPC-120
Cisco IOS IP Configuration Guide
Monitoring the MNLB Forwarding Agent
To monitor the status of the Forwarding Agent, use the following commands in EXEC mode, as needed:
Monitoring and Maintaining HSRP Support for ICMP Redirect Messages
To display the status of ICMP redirect messages, use the following commands in EXEC mode, as
needed:
IP Services Configuration Examples
This section provides the following IP configuration examples:
• ICMP Services Example
• Simplex Ethernet Interfaces Example
• DRP Server Agent Example
• Numbered Access List Examples
• Named Access List Example
• IP Extended Access List with Fragment Control Example
Router# show ip redirects
Displays the address of the default router and the address of hosts
for which an ICMP redirect message has been received.
Router# show ip sockets
Displays IP socket information.
Router# show ip tcp header-compression
Displays statistics on TCP header compression.
Router# show ip traffic
Displays IP protocol statistics.
Router# show standby [interface [group]] [active
| init | listen | standby][brief]
Displays the status of the standby router.
Router# show standby delay [type number]
Displays HSRP information about delay periods
Router# show tcp statistics
Displays TCP statistics.
Command Purpose
Command Purpose
Router# show ip casa affinities
Displays the status of affinities.
Router# show ip casa oper
Displays the operational status of the Forwarding Agent.
Router# show ip casa stats
Displays statistical information about the Forwarding Agent.
Router# show ip casa wildcard
Displays information about wildcard blocks.
Command Purpose
Router# debug standby events icmp
Displays debug messages for HSRP-filtered ICMP redirect
messages.
Router# debug ip icmp
Displays information on ICMP transactions.