Filter
Top Products
91
1745D–ATARM–04-Nov-05
AT91M55800A
14.0.2 WD Overflow Mode Register
Name: WD_OMR
Access: Read/Write
Reset Value: 0
Offset: 0x00
• WDEN: Watchdog Enable (Code Label WD_WDEN)
0 = Watchdog is disabled and does not generate any signals.
1 = Watchdog is enabled and generates enabled signals.
• RSTEN: Reset Enable (Code Label WD_RSTEN)
0 = Generation of an internal reset by the Watchdog is disabled.
1 = When overflow occurs, the Watchdog generates an internal reset.
• IRQEN: Interrupt Enable (Code Label WD_IRQEN)
0 = Generation of an interrupt by the Watchdog is disabled.
1 = When overflow occurs, the Watchdog generates an interrupt.
• EXTEN: External Signal Enable (Code Label WD_EXTEN)
0 = Generation of a pulse on the pin NWDOVF by the Watchdog is disabled.
1 = When an overflow occurs, a pulse on the pin NWDOVF is generated.
• OKEY: Overflow Access Key (Code Label WD_OKEY)
Used only when writing WD_OMR. OKEY is read as 0.
0x234 = Write access in WD_OMR is allowed.
Other value = Write access in WD_OMR is prohibited.
31 30 29 28 27 26 25 24
––––––––
23 22 21 20 19 18 17 16
––––––––
15 14 13 12 11 10 9 8
OKEY
76543210
OKEY EXTEN IRQEN RSTEN WDEN