Filter
Top Products
151
1745D–ATARM–04-Nov-05
AT91M55800A
• TIMEOUT: Receiver Time-out (Code Label US_TIMEOUT)
0 = There has not been a time-out since the last “Start Time-out” command or the Time-out Register is 0.
1 = There has been a time-out since the last “Start Time-out” command.
• TXEMPTY: Transmitter Empty (Code Label US_TXEMPTY)
0 = There are characters in either US_THR or the Transmit Shift Register or a Break is being transmitted.
1 = There are no characters in US_THR and the Transmit Shift Register and Break is not active.
Equal to zero when the USART is disabled or at reset. Transmitter Enable command (in US_CR) sets this bit to one.