Filter
Top Products
194
1745D–ATARM–04-Nov-05
AT91M55800A
20.7.1 SPI Control Register
Register Name: SP_CR
Access Type: Write-only
Offset: 0x00
• SPIEN: SPI Enable (Code Label SP_SPIEN)
0 = No effect.
1 = Enables the SPI to transfer and receive data.
• SPIDIS: SPI Disable (Code Label SP_SPIDIS)
0 = No effect.
1 = Disables the SPI.
All pins are set in input mode and no data is received or transmitted.
If a transfer is in progress, the transfer is finished before the SPI is disabled.
If both SPIEN and SPIDIS are equal to one when the control register is written, the SPI is disabled.
• SWRST: SPI Software reset (Code Label SP_SWRST)
0 = No effect.
1 = Resets the SPI.
A software triggered hardware reset of the SPI interface is performed.
31 30 29 28 27 26 25 24
– – – – – – – –
23 22 21 20 19 18 17 16
– – – – – – – –
15 14 13 12 11 10 9 8
– – – – – – – –
7 6 5 4 3 2 1 0
SWRST
– – – – –
SPIDIS SPIEN