Filter
Top Products
119
1745D–ATARM–04-Nov-05
AT91M55800A
16.9.3 PIO Status Register
Register Name: PIO_PSR
Access Type: Read-onlyRead-only
Offset:
0x08
Reset Value: 0x3FFFFFFF (A)
0x0FFFFFFF (B)
This register indicates which pins are enabled for PIO control. This register is updated when PIO lines are enabled or
disabled.
1 = PIO is active on the corresponding line (peripheral is inactive).
0 = PIO is inactive on the corresponding line (peripheral is active).
16.9.4 PIO Output Enable Register
Register Name: PIO_OER
Access Type: Write-only
Offset:
0x10
This register is used to enable PIO output drivers. If the pin is driven by a peripheral, this has no effect on the pin, but the
information is stored. The register is programmed as follows:
1 = Enables the PIO output on the corresponding pin.
0 = No effect.
31 30 29 28 27 26 25 24
P31 P30 P29 P28 P27 P26 P25 P24
23 22 21 20 19 18 17 16
P23 P22 P21 P20 P19 P18 P17 P16
15 14 13 12 11 10 9 8
P15 P14 P13 P12 P11 P10 P9 P8
76543210
P7 P6 P5 P4 P3 P2 P1 P0
31 30 29 28 27 26 25 24
P31 P30 P29 P28 P27 P26 P25 P24
23 22 21 20 19 18 17 16
P23 P22 P21 P20 P19 P18 P17 P16
15 14 13 12 11 10 9 8
P15 P14 P13 P12 P11 P10 P9 P8
76543210
P7 P6 P5 P4 P3 P2 P1 P0