Filter
Top Products
12 Setting preferences for your Acer s10
Network preferences
288
4 In the pick list, tap any of the following commands to select them, and then enter
additional information if a field appears:
Wait For Instructs Acer s10 to wait for specific characters from the TCP/IP
server before executing the next command
Wait for Prompt Detects a challenge-response prompt coming from the server
and then displays the dynamically generated challenge value.
You then enter the challenge value into your token card, which
in turn generates a response value for you to enter on your
Acer s10 . This command takes two arguments, separated by a
vertical bar (|) on the input line.
Send Transmits specific characters to the TCP/IP server to which you
are connecting.
Send CR Transmits a carriage return or LF character to the TCP/IP server
to which you are connecting.
Send User ID Transmits the User ID information entered in the User ID field of
the Network Preferences screen.
Send Password Transmits the password entered in the Password field of the
Network Preferences screen. If you did not enter a password,
this command prompts you to enter one.
NOTE: The Password command is usually followed by a Send CR
command.
Delay Instructs Acer s10 to wait a specific number of seconds before
executing the next command in the login script.
Get IP Reads an IP address and uses it as the IP address for your
Acer s10 . This command is used with SLIP connections.
Prompt Opens a dialog box and prompts you to enter text of some kind,
for example, a password or a security code.
End Identifies the last line in the login script.