Filter
Top Products
11 Exchanging and updating data using HotSync operations
Performing a HotSync operation via modem
262
3 Adjust the following options as needed:
4 Click OK.
Preparing your Acer s10
In addition to preparing your computer, you must perform a few steps to prepare your
Acer s10 for a modem HotSync operation.
To prepare your Acer s10 for a modem HotSync operation:
1 In Applications Launcher, tap the HotSync icon .
2 Tap Modem.
3 Tap the pick list below the icon and select a modem configuration.
Serial Port Identifies the port for the modem. If you are unsure of
the port assignment, look at the Modem Properties in
the Windows Control Panel.
Speed Determines the speed at which data is transferred
Try the As Fast As Possible rate first, and adjust
downward if you experience problems. This setting
allows Palm Desktop and your Acer s10 to find and use
the fastest speed.
Modem Identifies the modem type or manufacturer. Refer to
your modem manual or face plate for its type or
settings. If you’re not sure of your modem type or your
modem doesn’t match any that appear in the list, select
Hayes Basic.
Setup String Identifies the setup string for your particular modem.
Not all modems require a setup string. Refer to your
modem manual and enter the setup string if
recommended by the manufacturer.