Filter
Top Products
33
Q: I want to print out my information. What do I
need?
A: Here are the things you will need:
1. The SHARP CE-IR1 wireless interface for printers.
2. A standard PC printer cable.
3. Any parallel PC printer that emulates one of the
following printers:
Canon BJ-10e series
IBM ProPrinter series
Epson FX series, LQ series
Hewlett-Packard LaserJet series
Most printers, including portable ink-jet printers on
the market today, emulate at least one of these
printers. Check with your local computer dealer for
more information about printers.
Q: How can I back up my data?
A: It is important to always have a back-up of your
important information. Here are some ways of doing
this:
1. You can print out a hard copy using the optional
accessories. See p.170.
2. You can use PC or Macintosh link software either
from SHARP or a third party. You will also need
one of the various PC-Link cables or the CE-IR2
wireless interface for computers. Check with your
local dealer regarding features and availability of
these products.
Q: I can’t seem to turn my Organizer on. I changed
the batteries but still nothing happens. What
should I do?
A: Check the following before sending the unit in for
service:
c Check that the battery replacement switch on the
back of the unit is in the NORMAL OPERATION
position. If the switch is in the REPLACE
BATTERIES position, the Organizer cannot be
turned on.
c Check or replace the operating batteries, even if
you have just replaced the batteries. It is possible
that the batteries were not fresh when you
purchased them.
c Press the RESET switch. If the Organizer has been
dropped, for example, it may have to be reset. This
will not delete your data (as long as you type
N
at
the Initialization prompt). If for any reason data is
missing after resetting the Organizer, it was lost
before you pressed the RESET switch. The RESET