Filter
Top Products
INTRODUCTION AND OPERATION
1-13
March 1999
Part No. 001-2009-600
SPECIFICATIONS
GENERAL
1
Frequency Range 896-901 MHz Receive, 935-940 MHz Transmit
Dimensions 9.125 H x 17" W x 20.9" D
AC Voltage/Frequency 100-240V AC/50-60 Hz
AC Current (at 117V AC) 0.40A (Standby), 1.8A (25W), 3.3A (75W), 5.8A (160W)
AC Input Power 47W (Standby), 211W (25W), 390W (75W), 680W (160W)
DC Current at 26.5V DC 6A (25W), 11A (75W), 22.5A (160W)
Number of Channels 1 (Synthesized, programmable)
Channel Spacing 12.5 kHz
Channel Resolution 12.5 kHz
Temperature Range -30°C to +60°C (-22°F to +140°F)
Duty Cycle Continuous
FCC Type Acceptance ATH2422009, ATH2422009-1
FCC Compliance Parts 15, 90
RECEIVER
12 dB SINAD 0.35 µV
20 dB Quieting 0.50 µV
Signal Displacement Bandwidth ±3 kHz
Adjacent Channel Rejection -75 dB
Intermodulation Rejection -75 dB
Spurious & Image Rejection -90 dB
Audio Squelch Sensitivity 12 dB SINAD
Audio Response +1/-3 dB TIA
Audio Distortion Less than 3% at 0.5W/16 ohms
Local Audio Power 0.5W/16 ohms
Audio Sensitivity ±750 Hz
Hum & Noise Ratio -45 dB
Frequency Spread 5 MHz
Frequency Stability ±0.1 PPM -30°C to +60°C (-22°F to +140°F)
TRANSMITTER
RF Power Output Low Power = 75W min (default setting) 25W (variable set point)
High Power = 160W min (default setting) 75W (variable set point)
Spurious Emissions -90 dBc
Harmonic Emissions -90 dBc
Audio Deviation ±1.6 kHz
LTR Data Deviation ±750 Hz
CWID Deviation ±1 kHz
Repeat Deviation ±800 Hz
Audio Response +1/-3 dB TIA
Audio Distortion Less than 2%
Hum & Noise (TIA) -45 dB
Frequency Spread 5 MHz
Frequency Stability ±0.1 PPM -30°C to +60°C (-22°F to +140°F)
Emission Designators 11K0F3E, 11K0F1D
1. These general specifications are intended for reference and are subject to change without notice. Contact the Systems
Applications consultants for guaranteed or additional specifications.