Filter
Top Products
System & Station
Program *09 – [PDN], [PhDN], DH, ACD or Modem DID Ext. Assignments
Strata DK Programming 5/99 3-25
System & Station
Program *09 – [PDN], [PhDN], DH, ACD or Modem DID
Ext. Assignments
Processor Type:
See legend below
Program Type:
Station
Initialized Default:
See legend below
Processor
[PDN]
Port
Range
[PDN] Ext.
#
[PhDN]
Port
Range
[PhDN]
Ext. #
DH Group
Ports
DH Ext. #
Default
ACD
Port #
ACD Ext. #
RMDS/IMDU
Modem Port
Modem
[PhDN] Ext. #
DK14 000~009 10~19 500~509 50~59 900~915 Blank N/A N/A N/A N/A
DK40i 000~027 10~37 500~527 50~77 900~915 Blank N/A N/A 031 41
RCTUA 000~031 200~231 500~531 500~531 900~915 Blank N/A N/A 035 235
RCTUBA/BB 000~079 200~279 500~579 500~579 900~915 Blank 090~097 290~297 085 285
RCTUC/D 000~239 200~439 500~739 500~739 900~915 Blank 250~265 450~465 245 445
RCTUE/F 000~335 100~435 500~835 450~785 900~915 Blank 345~360 850~865 340 840
[PDN],
[PhDN], DH,
ACD or
Modem Port
[PDN], [PhDN], DH, ACD
or Modem Port
DID Ext. # (1~4 Digits)
[PDN],
[PhDN], DH,
ACD or
Modem Port
[PDN], [PhDN], DH, ACD
or Modem Port
DID Ext. # (1~4 Digits)
[PDN],
[PhDN], DH,
ACD or
Modem Port
[PDN], [PhDN], DH, ACD
or Modem Port
DID Ext. # (1~4 Digits)
SELECT = Port No. (see legend)
To add a port range, enter XXX
XXX
(low port
high port). (Do not press #
after entering a port range.) Then enter
the lowest DID Ext. number as the first
Ext. number in the range.
DIAL = DID Extension Number (1~4 digits)
Press LED Button 01 to erase extension
numbers.