Filter
Top Products
System & Station
Program 59 – Attendant Console Flexible Button Codes
3-138 Strata DK Programming 5/99
Notes
● See Program *15 for Tenant Group assignments.
● Picks up calls to telephones in any call pickup group to which the telephone is assigned in
Program *31.
● Attendant consoles cannot be equipped with [SDNs] or [PhDNs]. The console [DN] is
assigned to the console port number in Program 04. The console’s [DN] can have only one
appearance.
● Attendant consoles cannot be equipped with [PDNs], [SDNs], or [PhDNs]. The [In-DN]
button is the console’s [DN], assigned in Program 04; it supports incoming calls only and can
only appear once on a console.
Call Pickup (Group)4 Group Pickup 480
Picks up a call to any group to which
station is assigned in *31.
Do Not Disturb Do Not Disturb or DND 498 Prevents calls to station.
ISDN Sub-address Sub-address 467
Separates the called party’s ISDN sub-
address from the called party number.
The
digit performs this function on
standard telephones.
ISDN Start Start 469
Initiates DK to send dialed digits to the
ISDN network when this button is
pressed from a digital or electronic
telephone. Program *63-2 invokes the
same function when the Dial Timer
expires. Also see Tone Button in this
table.
LCD Message Select LCD Msg Select or LCD M 481 Begins LCD message selection.
Night Transfer Lock
Tenant 1~Night Transfer
Lock Tenant 4
Night Lock1 or NT1 L1~Night
Lock4 or NT4 L4
431~434
Used to lock system ringing mode: DAY,
DAY2, NIGHT See Programs 74 and *36
for NT Lock Password assignments.
Release and Answer Release and Ans and RLS/ANS 466
Simulates On-hook/Off-hook operation
to release an existing call and answer
new incoming/ringing call.
Save Last Dialed Number Save Last Number or SAVE 485
Saves last number dialed for future
speed dial.
Station Speed Dial Codes SD
Reserves button for station speed dial
for the following processors:
*10~*49 RCTUBA/BB
*10~*49 RCTUC/D
*100~*139 RCTUE/F
System Speed Dial Codes SD
Speed dial number is set by station port
000.
*600~*699 RCTUBA/BB
*600~*699 RCTUC/D
*200~*999 RCTUE/F
Tone Tone Dial Select or TONE 490
CO dial signals set to tone or pulse.
For ISDN applications, after the user
presses the Tone Dial Select button, any
digits dialed after it is will be sent using
DTMF tones.
Table 3-6 Additional Feature Button Codes
(continued)
Button Function Button Labels Code Notes