Filter
Top Products
System & Station
Program *32 – RS-232 Voice Mail Message Center Port
Strata DK Programming 5/99 3-89
System & Station
Program *32 – RS-232 Voice Mail Message Center Port
Processor Type:
DK14, DK40i, All RCTUs
Program Type:
Station
Initialized Default:
Blank
Program *32 Overview
This program assigns which Voice Mail Message Center port number will be called when a station
user presses the flashing
0VJ button. When using SMDI or DTMF voice mail integration, the
Voice Mail Port Message Center must be assigned for each station. The Message Center port must
be the lowest voice mail standard telephone port in the Program 31 Voice Mail Group. It is
normally the same port for all stations.
Processor Type Port Range Processor Type Port Range
DK14 008~009 RCTUBA/BB 000~079
DK40i 008~027 RCTUC/D 000~239
RCTUA 000~031 RCTUE/F 000~335
Port MW Center Port Port MW Center Port Port MW Center Port Port MW Center Port
SELECT = Station Logical Port Number
(see ranges below)
Enter the port number having a Message
Center assigned. Enter all station ports
using the same Voice Mail machine.
To add a port range, enter XXX
XXX
(low port
high port).
VM PORT = Voice Mail Message Port
Enter the Voice Mail Message Center Port
number (see ranges below) that should be
assigned to each station.
Enter the lowest KSTU2, QSTU2 or RSTU2 port
number that is connected to the VM machine.
If VM ports are assigned to a Distributed Hunt
(DH) Group in Program *40, enter the port
number of the first DH Group member, not the
DH Group port (900~915). See example following