Filter
Top Products
ISDN
Program *67-2 – Call Types for ISDN Trunk Group Supported
Strata DK Programming 5/99 7-29
ISDN
Program *67-2 – Call Types for ISDN Trunk Group
Supported
Processor Type:
All RCTUs (Release 4.0 or higher)
Program Type:
Trunk, PRI
Initialized Default:
Blank
Program *67-2 Overview
This program defines the call type or “Bearer Services” allowed for each ISDN trunk group. These
settings will be set for three different time zones in an upcoming release. All of the call types that
will be used should be turned on. Normally, Speech and 3.1 kHz Audio (non-ISDN voice calls and
fax calls), should be turned on.
Trunk
Groups
Time Zone
Speech
LED 01
3.1 kHz Audio
LED 02
64 kbps. Data
LED 03
56 kbps. Data
LED 04
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Turn on LEDs 01~04 to select the
call type. See table below.
Enter the Trunk Group (01~16)
Enter the Time Zone (1~3)
For Rel. 4.0, enter 1
SEL = 2