Filter
Top Products
E911
Program *11-8 – 911 Special [DN] Notification Assignments
8-10 Strata DK Programming 5/99
Program *11-8 – 911 Special [DN] Notification
Assignments
Processor Type:
All RCTUs (Release 4.0)
Program Type:
System
Initialized Default:
Data, Blank
Program *11-8 Overview
This program designates which [PDN] or PhDN] should have ringing notification on 911 calls (all
installed consoles are always notified). A unique (or the same) [DN] can be designated as the E911
notification DN in each system ring mode: Day, Day2, and Night.
The E911 Internal Notification option is enabled/disabled in Program *11-0, LED 03. When this
option is enabled, 911 calls will be sent on the CAMA trunk normally and will also ring on
attendant consoles’ Emergency ICI buttons and a designated telephone’s [DN] ([PDN] or
[PhDN]), if assigned in this program. Special CESID information regarding the E911 caller will
display on attendant consoles monitors and/or on notification telephone LCDs to help identify the
location of the telephone that dialed 911.
All telephones that must be notified when a 911 call is made must have an appearance of the
notification [DN] button (Program 39) and the Notification DN must be programmed to ring
(immediate or delayed) the notification telephones (Programs *71, *72 and/or *73).
If the notification [DN] has Call Forward set, the call will follow the call forward process as a
normal internal call.
When the notification [DN] is answered, a three-party conference is established between the E911
originating station, the E911 dispatcher (on CAMA trunk), and the E911notification station/
console answering party. After the E911 notification call is answered, it stops ringing on all
stations/consoles where it was presented.
Processor [PDN] Port Range [PhDN] Port Range Processor [PDN] Port Range [PhDN] Port Range
DK14 000~009 500~509 RCTUBA/BB 000~079 500~579
DK40i 000~027 500~527 RCTUC/D 000~239 500~739
RCTUA 000~031 500~531 RCTUE/F 000~335 500~835
Mode [DN] Port Number
Day
Day2
Night
[PDN] or [PhDN] port number that should ring to be
notified when 911 is dialed by a station (*71, *72 or
*73 required for ringing)
SELECT = 8
1 = Day Mode
4 = Day2 Mode
7 = Night Mode