Filter
Top Products
System & Station
Program 78 – CO Line Special Ringing Assignments
3-168 Strata DK Programming 5/99
Program 78 – CO Line Special Ringing Assignments
Processor Type:
DK14, DK40i
Program Type:
Station
Initialized Default:
All LEDs are OFF
Processor CO Line Range Processor CO Line Range
DK14 001~004 RCTUBA/BB 001~048
DK40i 001~012 RCTUC/D 001~144
RCTUA 001~016 RCTUE/F 001~200
Feature
Number
Code
Feature
Description
Line
LED 0102030405060708091011121314151617181920
1 3
Ring Over External Page
during NIGHT mode
2
1
DISA CO Line during DAY
Mode
2
DISA CO Line during DAY2
Mode
3
DISA CO Line during NIGHT
Mode
5
1
Ring IMDU or RMDS
1
Modem
during DAY Mode
1. RMDS requires RSIU and is available with DK424 only, IMDU requires PIOU or PIOUS. See Programs 77-1 LED 14, and Program 76 for
RMDS. Only one built-in maintenance modem, IMDU or RMDS, will function at a time in DK424.
2
Ring IMDU or RMDS
1
Modem
during DAY2 Mode
3
Ring IMDU or RMDS
1
Modem
during Night Mode
6
1
Auto Attendant during DAY
Mode
2
2. If CO lines should ring telephones before the Auto Attendant answers, use Program 81~89 to assign telephones to ring. Do not assign telephones
in Program 81~89, if the Auto Attendant should answer on the first ring.
2
Auto Attendant during DAY2
Mode
2
3
Auto Attendant during Night
Mode
2
CO Line
Specify CO lines with LED Buttons as defined by the table
below. All LEDs with an X should be lit when finished.
Press
to advance or to go back.
After programming, press:
Press
▲ to turn all LEDs ON
Press
▼ to turn all LEDs OFF
+ CO line number + to display and advance
Feature Number
1, 2, 5, or 6
Code 1~3