Filter
Top Products
System & Station
Program *41 for DK424 – T1 Assignment Series (Part 1)
3-122 Strata DK Programming 5/99
Program *41 for DK424 – T1 Assignment Series (Part 1)
Processor Type:
RCTUBA/BB, RCTUC/D and RCTUE/F
Program Type:
System
Initialized Default:
See each program
Series Overview
Use Program 41 (Part 1) and 42 (Part 2) series to set T1 parameters and assignments on the
DK424. See the Strata DK Configuration and T1 sections for additional T1 information. RCTU
support is as follows:
Program *41-1 – T1 Span (RDTU) Frame and Line Code Assignments
Initialized Default:
LED 01 and LED 02 OFF for all T1 span lines
Program *41-1 Overview
T1 Span Framing Assignments: Each RDTU PCB can be individually assigned for Superframe
(LED 01 OFF) or Extended Superframe (LED 01 ON).
T1 Span Line Code Assignments: Each RDTU PCB can be individually assigned for B8ZS
(LED 02 ON) or AMI coding (LED 02 OFF).
Processor Number of RDTU’s Supported
RCTUBA/BB 2
RCTUC/D 6
RCTUE/F 8
T1 Span
Extended Superframe
LED 01 ON
Superframe
LED 01 OFF
B8ZS
LED 02 ON
AMI Code
LED 02 OFF
1 RDTU
2 RDTU
3 RDTU
4 RDTU
5 RDTU
6 RDTU
7 RDTU
8 RDTU
SELECT = 1
Select the RDTU being
programmed (1~8)
LEDs 01 and 02
Set as described below.