Filter
Top Products
ISDN
Program *63 – ISDN Dialing Parameters
Strata DK Programming 5/99 7-17
ISDN
Program *63 – ISDN Dialing Parameters
Processor Type:
DK40i, All RCTUs (Release 4.0 or higher)
Program Type:
System, PRI and BRI
Initialized Default:
4 seconds
Program *63 Overview
This program sets the timer for sending dialed digits if the user does not press the 6WDUW button or
if the dialed number does not meet the established dialing plan number of digits.
When the sub-address dialing timer is set to 00, subaddress dialing is not supported.
Select Timeout Parameter Value Comments
1 Sub-address dialing Value 00 to 10 seconds (default 04)
2 Outdialing Value 02 to 10 second (default 04)
DATA = Seconds
(see table below)
SEL = 1 or 2
(see table below)