Filter
Top Products
System & Station
Program 77-1 – Peripheral Options (Door Phones)
Strata DK Programming 5/99 3-159
System & Station
Program 77-1 – Peripheral Options (Door Phones)
RSIU / RSIS / RMDS, PIOU/PIOUS / IMDU, PEPU
Processor Type:
DK14, DK40i, All RCTUs
Program Type:
System
Initialized Default:
All LEDs are OFF
LED/
Button
X LED ON LED OFF
20 Door Lock Time/6 seconds Door Lock Time/3 seconds
19 Port 028/DDCB 4 or HDCB 4 (DK424) Port 028/Telephone (DK424)
18 Port 020/DDCB 3 or
HDCB 3 (DK40i/DK424) Port 020/Telephone (DK40i/DK424)
17
Port 012/DDCB 2 or
HDCB 2 (DK424)
Port 012/DDCB 2 or HDCB 2 (DK40i
Expansion Unit)
Port 003/DDCB 2 (DK14)
Port 012/Telephone (DK40i Expansion Unit,
DK424).
Port 003/Telephone (DK14).
16
Port 004/DDCB 1 or HDCB 1 (DK424)
Port 004/DDCB 1 (DK40i)
Port 002/DDCB 1 (DK14)
Port 004/Telephone (DK40i, DK424).
Port 002/Telephone (DK14).
15 RMDS Modem Protocol CCIT (2400 bps) RMDS Modem Protocol Bell212A (1200 bps)
14 RMDS/IMDU Modem (DN #19)/Enabled RMDS/IMDU Modem (DN #19)/Disabled
10
Enable DKAdmin/Backup ACK/NAC Protocol Disable DKAdmin/Backup ACK/NAC
Protocol
08
Door Phone Ring on External Page in Night
Mode
No Ring on External Page in Night Mode
07 Door Lock Relay Enabled External Page Relay Enabled
06
NT Relay with NT1 and NT2 Button and
Ringing CO Line
NT Relay Steady with NT1 Button (DK424
only)
05 MOH Relay Enabled NT Relay Enabled
04 ——
03 ——
02
LED 02 applies to DK14/DK40i only.
LED 01 has priority.
External Page on Base Unit Relay Enabled
01
LED 01 applies to DK14/DK40i only.
MOH on Base Unit Relay Enabled
NT on Base Unit Relay Enabled
Light the LED Buttons that are
marked with an X in the table below.
SELECT = 1