Filter
Top Products
System & Station
Program *80 – Call Forward Station Ring Assignment
3-174 Strata DK Programming 5/99
Program *80 – Call Forward Station Ring Assignment
Processor Type:
All RCTUs with Release 3.2 and above
Program Type:
Station
Initialized Default:
LED 01, 04, and 07 ON for all lines
Program *80 Overview
Sets the Call Forward (CF) ringing assignment for ground/loop CO line calls. The station that
controls CF should be the only station programmed to ring in the appropriate Ringing Assignment
Programs (81~89). This program does not apply to Tie, DID, DNIS, or ANI lines.
Example application: A CO line call rings a CO line button on multiple stations, then Call
Forwards. CO line 001 is programmed to ring station 200, then after 12 secs., it delay rings
stations 201 and 202 (12 secs.). Then, CO line 001 will CF per station 203’s CF setting. If station
203 has CF-No Answer, CO line 001 will ring station 203, and then CF. If station 203 has CF-All
Calls, CO line 001 will not ring station 203, but will forward immediately.
Programming for the above example:
Program 39 - Put CO line 001 button on stations 200~203.
Program 81 - Set CO line 001 to ring station 200 immediately.
Program 82 - Set CO line 001 to Delay Ring station 201 and 202
Program 83 - Set CO line 001 to Delay 2 Ring station 203.
Program *80 - Set CO line 001 to CF during Delay 2 Ring assignment (LED 03 ON).
Set station 203 to CF to Voice Mail. When CO line 001 rings, the call will forward per station
203’s CF (All Calls, No Answer, etc.) setting during the Delay 2 ring period. Note that only station
203 can be set to ring in the Delay 2 (Program 83) ring assignment to allow CF to operate. VM will
receive station 203’s VMID (set via code #656).
Processor CO Line Range Processor CO Line Range
DK14 NA RCTUBA/BB 001~048
DK40i NA RCTUC/D 001~144
RCTUA 001~016 RCTUE/F 001~200
System
Ring Mode
Call Forward Station
Ring Assignment
LED
CO Lines
Night
Delay 2 (89) 09
Delay 1 (88) 08
Immediate (87) 07
Day 2
Delay 2 (86) 06
Delay 1 (85) 05
Immediate (84) 04
Day
Delay 2 (83) 03
Delay 1 (82) 02
Immediate (81) 01
LED buttons = ringing assignment in
which calls should Call Forward
SELECT = CO Line Number
To specify a CO line range, enter
XXX
XXX (low line
high line).