Filter
Top Products
Initialization & Test
Program 91-2 – Data Transfer from Temporary Memory to Working Memory
2-8 Strata DK Programming 5/99
Program 91-2 – Data Transfer from Temporary Memory
to Working Memory
Processor Type:
DK14, DK40i, All RCTUs
Program Type:
Initialization
Initialized Default:
See individual programs
Program 91-2 Overview
Program 91-2 simulates turning system power OFF for five seconds then ON to transfer data from
temporary memory to working memory.
This power OFF / power ON sequence is required when programming with a telephone or when
using DK Admin/DK Backup. In these cases Program 03, 41-2, 50 and 76-1 data must be
transferred from temporary to working memory.
Program 91-2 does not change or erase any programmed data including directory numbers set in
Program 04 and *04 or logical/physical port assignments in Program 01 and 02.
CAUTION! Running Program 91-2 drops all calls and renders the system inoperative for
up to eight seconds.
Program Telephone Exits Program Mode and Transfers Data
Enter programming mode.
(Do not press [DN] button.)
Press LED Buttons 03 and 04.
LEDs 03 and 04 must be ON.
LCD Displays:
91 SELECT = 2
Programming
Taking Effect