Filter
Top Products
ISDN
Program *43-1~3 – D-Channel Control and NFAS Assignments
7-10 Strata DK Programming 5/99
Program *43-1~3 – D-Channel Control and NFAS
Assignments
Processor Type:
All RCTUs (Release 4.0 or higher)
Program Type:
System, PRI
Initialized Default:
Blank (see Important! below)
Program *43-1~3 Overview
Programs *43-1~3 are related in that there is a correspondence between Program *43-1 and *43-2.
Program *43-1 determines which channel acts as the master. Program *43-2 points back to the
master channel by using the corresponding index number.
Program *43-1 Overview
This program (*43-1) assigns which channel on the PRI link is used for D-channel (the data master
control channel). The default setting is none.
Important! For most carriers, channel 24 is assigned to the D-channel (default). NFAS
D-channel assignments are negotiated with the carrier.
PRI Index
*43-1
D-Channel
Circuit Number
*43-2
Master
PRI Index
*43-3
Network PRI
Interface ID Code
Enter PRI Index Number (1~8)
DCH = D-channel circuit number (01~24)
LED Button 01 deletes a digit
SEL = 1