Filter
Top Products
ISDN
Program *69-1 – CNIS Presentation Parameters
Strata DK Programming 5/99 7-35
Program *69-1 – CNIS Presentation Parameters
Processor Type:
DK40i, All RCTUs (Release 4.0 or higher)
Program Type:
Trunk, PRI and BRI
Initialized Default:
none
Program *69-1 Overview
This program defaults all ports to the 00 index, which means that outgoing calls will present the
Directory Number entered in Program *68-2 as the Calling Number for outbound calls. Each
station on the Strata DK can send a unique number based on the station making the call assigning
an index other than 00, and entering the number as Type 2 to be used in Program *69-2 or send a
Type 1 DID number by entering a prefix code to create a complete number.
Note If the PSTN is to use this number for billing the call, the number sent must match those
provided by the PSTN.
Station Ports
Channel
Group
Index
Enter Station Port(s)
To add a range, enter
XXX*XXX (low port * high port)
SEL = 1
CG = Channel Group (1~8)
INDX = Index Number (00~32)
Index 00 uses default value assigned in*68-2.
All others use values assigned in *69-2