Filter
Top Products
Toll Restriction
Programs 46-10~80 – Toll Restriction Class Parameters
Strata DK Programming 5/99 4-33
Toll Restriction
Programs 46-10~80 – Toll Restriction Class
Parameters
Processor Type:
DK14, DK40i, All RCTUs
Program Type:
Toll Restriction
Initialized Default:
All LEDs OFF
Programs 46-10~80 Overview
This program defines parameters of each Toll Restriction class, including dialing plan restrictions
and exceptions to previous restrictions. This program also relates to Program 47. See Program 47
for more explanation.
Run these programs for dial 0, 01, */# restriction and long distance information (555) assignments.
Toll Restriction exceptions and dialing plan restrictions may be defined for each class.
♦ Programs 46-10 and 46-11 assign Class 1 restriction exceptions and parameters
♦ Programs 46-20 and 46-21 assign Class 2
♦ Programs 46-30 and 46-31 assign Class 3; etc.
LED 01: 0 Restricted
Mark an X next to LED 01 if operator or operator-assisted calls are restricted for the class being
defined. To allow 0 + dialing LED 01 must be OFF. Allowing 0 + dialing allows operator-assisted
toll calls. If a station is allowed 0 + Credit Card calling in Program 43, LED 01 must be OFF.
Program 43 will restrict operator assisted calls.
Processor Toll Restriction Class Processor Toll Restriction Class
DK14 1~4 RCTUBA/BB 1~4
DK40i 1~4 RCTUC/D 1~8
RCTUA 1~4 RCTUE/F 1~8
Class Number
Button 01 LED Button 02 LED Button 03 LED Button 04 LED
ON OFF ON OFF ON OFF ON OFF
Dial 0
Restricted
Dial 0
Allowed
Dial 01
Restricted
Dial 01
Allowed
A/C+555 or 1+A/
C+555 Allowed
for all A/Cs
555 Allowed or
Denied per A/C
Restriction
TA bl e
Restrict
Numbers that
contain * or #
within the first
4 digits
Allow
Numbers that
contain * or #
within the first
4 digits
1
2
3
4
5
6
7
8
Turn LEDs 01, 02, 03, or 04 ON to select restriction option.Select Class from Legend below.