Filter
Top Products
System & Station
Program *71~*73 – [DN] to [DN], Tie to [DN], and DID to [DN] Ringing Assignments
3-152 Strata DK Programming 5/99
Program *71~*73 – [DN] to [DN], Tie to [DN], and DID to
[DN] Ringing Assignments
Processor Type:
DK14, DK40i, All RCTUs
Program Type:
System
Initialized Default:
[PDNs] are programmed to immediately ring their
respective telephones in Program *71; no other default ringing assignments are made.
Important! In the EK Telephone Ports column, enter the Program 04 telephone ports of the
telephones that should ring when the [DN] is called from another [DN] or a Tie or
DID line (maximum of 120 telephones can be assigned to ring). The [DN] button
must be assigned (Program 39) to the telephone that should ring.
Processor [PDN] Port [PhDN] Port Processor [PDN] Port [PhDN] Port
DK14 000~009 500~509 RCTUBA/BB 000~079 500~589
DK40i 000~027 500~527 RCTUC/D 000~239 500~739
RCTUA 000~031 500~531 RCTUE/F 000~335 500~835
[DN] Port Reference
Number
EK Telephone Ports (The Program 04 [PDN] port number of the telephones that should ring.)
Press the button associated with the
telephones (EKs) that should ring
when the selected [DN] is called.
Port Reference Number of that should ring [PDN] or [PhDN]
Press
to advance or to go back.
Press Vol▲ to turn all LEDs ON.
Press Vol▼ to turn all LEDs OFF.
Enter:
1 = Immediate Ring
2 = Delay 1 Ring (12 sec. delay)
3 = Delay 2 Ring (24 sec. delay)
To add a port range, enter
XXX
XXX (low port
high port).