Filter
Top Products
System & Station
Programs *81, *84, and *87 – Ground/Loop Start/CO Line to [DN] LED Flash Assignments
Strata DK Programming 5/99 3-179
System & Station
Programs *81, *84, and *87 – Ground/Loop Start/CO
Line to [DN] LED Flash Assignments
Processor Type:
DK14, DK40i, All RCTUs
Program Type:
System
Initialized Default:
CO 018~200 flashes Port 000 (
*
81) and Port 001 (
*
87)
Important! Blank out initialized default data if CO line should not ring and flash [PDN]
assigned to port 000 and port 001. If this initialized data is programmed when other
[DNs] or telephones should flash and ring, Call Forward and Station Hunt may not
operate properly.
Processor CO Line
[PDN] Port
Range
[PhDN] Port
Range
Processor CO Line
[PDN] Port
Range
[PhDN] Port
Range
DK14 001~004 000~009 500~509 RCTUBA/BB 001~048 000~079 500~579
DK40i 001~012 000~027 500~527 RCTUC/D 001~144 000~239 500~739
RCTUA 001~016 000~031 500~531 RCTUE/F 001~200 000~335 500~835
CO Line
Number
Day Ring
[DN] (*81)
Day 2 Ring
[DN] (*84)
Night Ring
[DN] (*87)
CO Line
Number
Day Ring
[DN] (*81)
Day 2 Ring
[DN] (*84)
Night Ring
[DN] (*87)
.
Ringing Assignments
1 = Day Ring
4 = Day 2 Ring
7 = Night Ring
CO line number (see table below)
To add a CO line range, enter XXX
XXX
(low CO line
high CO line).
Station Logical Port Number
Enter the [PDN] or [PhDN] that should flash
LED Button 01 enters blank data.